Dwyer Mark II Model 27 Incline Manometer (Air Velocity)

Dwyer Mark II series moldedmanometers are of the inclined andinclined-vertical types. The curvedinclined-vertical tube of the Model 25gage provides higher ranges with moreeasily read increments at low readings.The Model 25 is excellent for generalpurpose work. The Model 40 inclined gageprovides linear calibration andexcellent resolution throughout itsrange. The Model 40 is ideally suitedfor air velocity and air filter gageapplications. Both gage types arecapable of pressure measurements aboveand below atmospheric as well asdifferential pressure measurements.

Dwyer Mark 11 Inclined Manometer

• Wall mounted inclined manometer with screws.
• Red gauge oil
• Green and red arrows for attachment to face of manometer
• Eight feet of double column flexible tubing,

  Construction and installation features: Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof "O" ring seals. Scales are lithograph printed on aluminum and epoxy coated. For stationary applications, the Mark II air velocity meters can be easily mounted on any vertical surface with the two screws provided.

  Installation Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

  Accessories Included with each Mark II manometer are two tubing connectors for 1/8" pipe or sheet metal ducts, two mounting screws, 3/4 oz. bottle of indicating fluid, red and green pointer flags and complete instructions.

  The Model 25 includes 8 feet' of flexible double column plastic tubing. Portable operation of the Model 25 is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the Model 25 pressure connections to contain the gage oil in transit.

Model 27 Product Sheet