Tenergy Universal Smart Charger for 6v - 12v NiMH/NiCD Battery Packs in Retail Packaging

Features and Benefits

• Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6V, 7.2V, 8.4V, 9.6V, 10.8V and 12V
• Patent pending watchdog technology provides maximum safety
• Universal for any NiMH /NiCd battery packs 6V - 12V (5-10 Cells Pack)
• Fast charger with current switch to select either 1A or 2A
• Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh
• Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours
• Smart Charger with automatic voltage detection
• Temperature sensor to protect battery pack from over heating
• Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life
• Red LED will be on during charging
• Automatically charging ending with negative delta V
• Worldwide usage with 120-240V AC

Accessories Included

• 1 standard Tamiya connector with Temperature Sensor.
• 1 adapter from standard Tamiya to Mini Tamiya.
• 1 adapter from standard Tamiya to a pair of alligator clip.

Smart Charger Specification

• FOR 6V-12V NiMH/NiCD Battery Packs 5-10 Cells Packs
• Input: AC 100-240V
• Output: 6-12V, 1A or 2A

Operation Instruction

• Connect battery pack to output connector and plug AC power source
• Make sure battery polarity is connected correctly (Red wire is positive)
• Charger will detect battery voltage automatically, Red LED will be on during charging
• When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
• Battery will be charged at 1A or 2A constant current (selectable)
• Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery
• The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun
• Don't charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
• Battery pack must be made by high drain current cell
• Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse.

Caution

• The charger is designed for indoor use only. Don't leave the charger unattended during charging.
• The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
• Don't cover the charger when charging, ambient temperature shall not be more than 40oC
• Don't touch the plug.
• Don't leave the batteries and chargers on wood surface or carpet.
• Cut off the power supply before connect or disconnect the charger with batteries.
• Don't try to disassemble the charger; High voltage inside!

Download product data sheet here.