Tenergy 1-4 Cells Li-PO/Li-Fe Balance Charger + 11.1V 1350mAh 20C LIPO Battery Pack w/ EC3

Tenergy 1-4 Cells Li-PO/Li-Fe Balance Charger - Great for Airsoft & RC Car Battery Packs 

Can't afford LIPO balance chargers that can cost upwards of $75.00? Do the prices of those chargers prevent you from going with LIPO/LiFePO4 batteries?

Recently Released!A full featured 3.7v-14.8v (1S-4S) LIPO/LiFePO4 Balance charger at an amazing value. VERY popular for smaller capacity (mAh) Airsoft and other custom battery packs. Power Supply already included. Ready to charge your LIPO/LiFePO4 packs right out of the package. Also supports large capacity (mAh) packs, but will require a longer time to be fully charged.

Features & Benefits

• Built-in balancer. Batteries are automatically balanced during charging, ensuring full charge
• Advanced individual charging method-charge each cell individually
• Automatically charging process - makes it easy to use
• Light weight and attractive aluminum alloy case
• Safer and faster charging for better battery performance and life
• Fits 1S to 4S Li-PO/Li-Fe battery packs with XH type balance connector
• Multiple protection features provide maximum safety
• Charge Rate: 1A (1,000mah per hour)
• Applicable for Li-ion, LiPo and LiFePO4 battery packs

Specifications

InputDC 10-16V, 1.0-1.5AOutputDC 4.2V/16.8V (Li-PO)DC 3.6V/ 14.4V (Li-FE)Charging Current1.0ABattery TypeLi-PO/Li-lon/Li-FeDimension86 x 57.3 x 16.8 mmWeight100gReserve Polarity ProtectionYESShort-Circuit ProtectionYESInput Voltage ProtectionYES

Warning - Do Not charge the following types of battery:

• Lead acid battery or VRLA
• NiMH or NiCD battery pack
• Non-rechargeable battery (explosion hazard)
• Faulty or damaged battery
• Any other types except for LiPo/Li-ion/LiFePO4 battery packs

11.1V 1350mAh 20C Li-Poly Lipo 3 Cell Battery Pack with EC3 Connector For Helicopter 

• Continuous Discharge Rate: 20C / 27A
• Burst Discharge Rate: 30 C / 35A
• Discharge (Output) Leads: 16 AWG silicon wire, 95 mm long
• Maximum charge rate 1.35 Amps.
• Charging (Balancing) Lead: JST/Align/E-Flite connector. 24AWG PVC wire, 50mm Long 
• Dimension: 72 x 35 x 23 mm
• Weight: 110g

Note: Please read instructions before using!