Combo: Tenergy 1-4 Cells Balance Charger + Two 7.4v 900mah 25C LIPO Helicopter Battery Packs **Backordered: ETA 04/04

Tenergy 1-4S balance charger

• advanced individual charging method-charge each cell individually
• Safer and faster charging for better battery performance and life
• Fits most 1S to 4S Li-PO/Li-Fe battery packs with XH type balance connector
• light weight, super easy to use
• Multiple protection features provide maximum safety

Specifications

InputDC 10-16V, 1.0-1.5AOutputDC 4.2V/16.8V (Li-PO)DC 3.6V/ 14.4V (Li-FE)Charging Current1.0ABattery TypeLi-PO/Li-lon/Li-FeDimension86 x 57.3 x 16.8 mmWeight100gReserve Polarity ProtectionYESShort-Circuit ProtectionYESInput Voltage ProtectionYES

7.4 volt 900mAh 25C Li-Poly Lipo Battery Pack for Blade CX and CX2

Wanna fly the Blade CX/CX2 helicopter higher and smoother? Try this new 25C pack specially designed for Blade CX2 helicopter.

The newest battery upgrade for the Eflite Blade CX and CX/2:

• gain 12% more flight time over stock battery
• delivers more than twice the power with its 25C rating - beyond almost any other battery
• fits the stock battery tray perfectly and work with the stock charger.

This Tenergy Lithium polymer battery is rated at 900mAH 25C and is made for the Blade CX and CX/2, while the stock battery is rated at 800mAh; it means this Tenergy battery will provide much longer runtime. This battery will work with the e-flight charger and fits inside the CX helicopter without any modifications - direct replacement but a better battery; great quality and an exceptional value!

Features and Benefits:

• Continuous Discharge Rate: 25C / 22A
• Burst Discharge Rate: 50C / 45A
• Discharge (Output) Leads: 20 AWG silicon wire, 97 mm long, JST(BEC) connector (Same as the factory pack)
• Charging (Balancing) Lead: JST(Align, E-flight) Style 3-pin connector. 24AWG PVC wire, 38 mm Long  (Same as the factory pack)
• Dimension: 72x 24.5 x 12.5 mm
• Weight: 43g / 1.6oz

Note: Please read instructions before using!