Primary Lithium thionyl chloride Battery C Size 3.6V 9.0 Ah , same as LS26500 and ER26500 (non Rechargeable)(DGR-A)

Features and Benefits

• Ultra High Energy Density C sized Primary Lithium Thionyl Chloride battery
• Perfect battery choice for powering wireless alarm, security systems, industrial meters, memory backup for computers, night vision equipment and other devices need long-lasting batteries.
• Lithium Thionyl Chloride battery technology provides the highest energy density, three times higher than Alkaline (Zinc Manganese Dioxide) batteries.
• Widest operating temperature range of -76F to + 185 F, ideal for rough security, industrial and field applications
• Ultra low self discharge at less than 1% per year at +68F, enabling an effective shelf life of 10 years.
• Non-flammable electrolyte.
• Compatible with Saft  LS26500,LS26500C, Lithium cell
• UL Approved   --- BBCV2.MH30127.
• Passed UN transportation tests (T1-T8).
• Pre-soldered wires for easily making battery packs or other connections 

Key Technical Data (More details: Data sheet of ER26500)

 Chemistry Lithium-thionyl Chloride (Li-SOCl2) technology Nominal capacity 

 9 Ah ( 9,000 mAh)

 Open circuit voltage  (at +20C or +68F) 3.66V Nominal voltage (at 1mA +20C or +68F) 3.6V Max. Continuous current 200mA Max Pulse current Up to 400mA Storage (recommended) +30C (+86F) max Operating temperature range -55C / +85C Diameter (max) 26.2mm(1.02 in) Height (max) 50.5mm(1.98 in) Typical weight 55g   (1.8 oz)

Primary applications for:

• Radio communication equipments and other military electronics
• Building alarms, monitoring and security systems
• Industrial and residential metering systems
• Emergency location transmitters and Beacons
• Global POsitioning Systems (GPS)
• Computer or server memory back up
• LED lighting devices
• Sonobuoys
• Compatibale with and replaces SAFT LSH20 battery with over 40% more energy

Use Warning

• This battery is a non-rechargeable battery. DO NOT CHARGE THE BATTERY! 
• Do not use if the battery casing is damaged.
• Please discharge the battery for a few minutes with 100mA.
• Don't use different models of battery in series.
• This is not a high drain battery, please don't use it for the applications with discharging current > 200 mA!
• The storage area should be clean, cool (not exceeding +30 Deg C ), dry and ventilated