Kits: 4 Tenergy RCR123A 3.0V 900mAh Rechargeable Li-Ion Protected Batteries with a Smart Charger (WHITE)

Charger Features

• Worldwide usage. Auto AC power adjust from 100-240V.
• Smart, build-in microprocessor automatically switch off when batteries are fully charged.
• Safe, build-in IC provides various protection, Thermal protection, Overcharge protection, Short-circuit protection, mechanical. and electrical protection against reversal polarity, and auto defective battery identification.
• Convenient, 12V car cigarette lighter plug for on the road charging.
• Compact ( 2.5 x 4 x 1 inch ), Light weight ( 5 oz only ), include charger and all accessories.
• Charge 1 to 2 RCR123A from 1.5 hours to 3 hours. Peak voltage of 3.0V Li-Ion will be 3.60V after fully charged.
• UL certified.

RCR123A Features

• Rechargeable CR123A Li-Ion Batteries with 3.0V working voltage.
• Fully protected against over-charge, over-discharge, over-current and short-circuit.
• Tenergy RCR123A can be recharged up to 1000 times. 1 RCR123A Li-ion = 1000 CR123A Primary Cells
• Replace the most of non-rechargeable CR123A primary Lithium battery for a digital cameras and flashlight
• Modified Voltage to achieve 3.2v at full voltage; once loaded, cell voltage drops to 3.0v.
• Internal over-charge and over-discharge protection to prevent battery over use. The current will be shut off when the battery voltage drops below 2.5V.
• Capacity: 
• • Nominal: 600mAh
  • Maximum:900 mAh
• Internal Voltage Regulators.
• Dimension: 16 D x 34 H mm. (The height 34mm includes the button top).
• Weight: 17 g or 0.6 Oz.
• NOT COMPATIBLE WITH SUREFIRE FLASHLIGHT. DON'T USE THESE BATTERIES WITH ANY SURE FIRE FLASHLIGHTS.

TECHNICAL SPECIFICATIONS:

SymbolNameConditionsMIN.TYPICALMAX.UnitVDET1Over-Charge detect voltage 4.3004.3254.375VTVDDET1Output delay of over-Charge

C3=0.01uF, VDD=3.6, V->4.4V

175250325msVDET2Over-discharge detect voltage 2.42.52.6VTVDET2Output delay of over-DischargeVDD=3.6V,V->2.4V142026msVDET3Excess current detect voltage 0.105

0.125

0.145VIECExcess current threshold  3.03.5ATVDET3Output delay of Excess currentVDD=3.0V81216msIDDSupply currentVDD=3.9V,  V-=0V 36uAISTANDBYStandby currentVDD=2.0V  0.2uA