AT: Tenergy 11.1V 6000mAh Heavy Duty LIPO PCB Protected Battery Pack w/ Bare Leads

Features and Benefits

• 11.1V 6000 mAh Polymer Li-Ion technology made of 3-cell
• Voltage: 11.1v (working) 12.6V ( peak)
• Capacity: 6000mAh
• Max. Discharging rate: 6.5Amp with PCB
• One protective circuit board PCB installed with the battery pack that limits the discharging current of battery pack to 6 Amp. But protect battery from: - Over-charging cut-off; 13V - Over-discharging cut-off: 7.2V - Over-drain current limit; 6.5A - Short circuit and Wrong polarity
• Light-weighted : 13.4 oz.
• Dimension: 170mm x 53mm x 22mm
• 20AWG bare leads and shrink wrapped
• Recommended charger: Universal Li-ion / Li-polymer Smart Charger to charge this battery pack.

Caution:

Improper use like overcharging and over discharging can cause explosion and/or fire. User of the battery is required to have the sufficient Li-polymer charging and use experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.