14.8 volt 4000mAh 15C LiPoly Lipo 4 Cell Battery Pack for RC Cars-- Limited Quantity

Features and Benefits

• Continuous Discharge Rate: 15C /60A
• Burst Discharge Rate: 20 C / 80A
• Discharge (Output) Leads: 16 AWG silicon wire, 150 mm long
• Maximum charge rate 4 Amps.
• Charging (Balancing) Lead: JST/Align/E-Flite connector. 24AWG PVC wire, 60mm Long 
• Dimension: 144 x 44 x 22 mm
• Weight: 390g
• Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.

Note: Please read instructions before using!

Warnings:

• This Li-polymer battery pack has no PCM installed!
• We recommend using only Tenergy Balancing Chargers.
• All-Battery is not responsible for any damages caused by misuse of sold products.
• All-Battery is NOT responsible for non-compatibility with non-Tenergy branded Balance Chargers.
• For any questions regarding compatibility of other branded balance chargers, feel free to contact our customer service team:
  • Email: service@all-battery.com
  • Phone: (510) 979-9969