Motorcycle Turn Signal Mirrors (Set)

Kuryakyn Motorcycle Turn Signal Mirrors with flat glass

This Kuryakyn original looks good coming and going. From the drivers seat, they are a functional, great looking custom mirror.  The Flat glass gives a more accurate representation of the distance between you and following vehicles.  A heavy duty locking mechanism and swivel ball keep these mirrors adjusted just where you want them. Looking at the mirrors from the front, you'll notice a bank of L.E.D.'s that work as a running light and a super bright auxiliary turn signal. Unlike other lighted mirrors, these lights only face forward so glare is not a factor. The life of this light source will be several times that of incandescent bulbs. Fits all Harley models except for 04+ XL models.  Not recommended for Buckhorn Handlebars. Metric Mirror adapters are required for installation on metric or Victory cruisers.  Available under related items below. Please Note:  For a metric cruiser if using in parallel with your turn indicators you should not have a problem.  These Turn Signal Mirrors were designed to satisfy the flash requirements of Harley-Davidson motorcycles.

If using without being in parallel with front turn signals, you will need to install load equalizers to supply a load for your flasher assembly. The draw produced by these lights, or load equalizers used with these L.E.D. lights may or may not be what is needed for proper flash and frequency on your metric cruiser. You may have to experiment with different flashers, load equalizers, etc. to achieve the desired flash on your bike.

Installation Notes: To tighten the head, you will need to take the chrome wire cover off the arm and then you can remove the back LED assembly from the mirror.  This will give access to the ball assembly for tightening. If you are hooking up inside your headlight shell, you may need to lengthen the wires.  You will need a couple of small standard allen wrenches.