PHATRISERS, Kawasaki VN 1700 Classic, LT, Nomad & Voyager

PHATRISERS, Kawasaki VN 1700 Classic, LT, Nomad & Voyager MSRP:  $109.95

A Special PhatRiser 1X for the Kawasaki VN1700 Classic, VN 1700 Classic LT, 1700 Nomad, and 1700 Voyager motorcycles. Pick your bike above. As a result of the tree angle & offset in the head of the PhatRiser 1X handlebar riser, these risers raise the bars 2" above that of the OEM Kawasaki mount, and pulls your grips back 2" closer to you.

Works with original cables/hoses, but may require you to re-route the front brake hose to the RH side of the front chrome retainer on the upper tree (a VERY simple task, and instructions are included for this).

They bring the bars back a full 2" and up 2".  This significantly reduces rider back, neck and shoulder strain and allows for a more relaxed riding position.

They bolt on in minutes and retain all stock hoses and cables.

• CNC Machined in the US from solid 6061-T6 billet bar stock for strength and unmatched quality.  (Polished)
• A direct bolt-on accessory that works with the original hoses/cables in most applications.
• Instructions included for easy rerouting of cables if needed.
• Designed, manufactured, and tested in our shops for perfect fit on every bike model.
• PhatRiser 1X is designed specifically for the new VN1700s

Installation Guide for PullBack Risers:

• Cover gas tank with a towel to avoid scratching.
• Loosen bottom bolts to stock risers first.
• Have a friend hold onto handle bars while loosening the top clamp bolts.
• Remove stock Risers.
• Replace the OEM bolts with the supplied CWI bolts.
• Install bottom Nuts. 
• Position handlebars into risers and tighten down.
• Adjust bar height to comfort.