Auxiliary Motorcycle Light Adapter Extenders (pr)

Auxiliary Light Adapter Extenders (pr) These replacement light adapter extenders can be used to alleviate your windshield clearance problems when installing Auxiliary lights and light bars.  There are a couple of different applications and installation methods.

When using Custom World "A" or "D" lights with Vertical or Horizontal mounting, the replacement Adapters will extend your lights out or up (depending on light bar style) an additional 3/4 inch.  You will need to remove your original adapter and install the replacement longer adapter.  For vertical mounting, this may allow you to raise the lights up enough to clear the curve of the windshield for your light clearance. You will have a couple options for horizontal adapter mounting (lights set up with the original adapter at a 90 degree angle from the light bar:  1.  Using just the replacement adapter will get you an extra3/4 inchof windshield clearance.  2.  If you still do not have enough clearance this adapter can be used to mount the "B" or "C" lights on.  You will get2 1/2 inchesof forward clearance compared to the standard mount with the "A" light using this method.  The"B"and"C"lights do not have swivel adapters, just a straight mounting stud.  You will mount the light using a large washer onto the 05-0099adaptor and then mount the adapter to your light bar.  Thread locker is strongly suggested. 

 Additional Information

Visor Installation Instructions