4" Pullback Risers, Honda VTX 1300S, Retro

 Aeromach 4" Pullback Risers, Honda 1300 VTX Retro

These AeromachHonda PullBack Risers place your hands into a natural comfort zone by raising the bars 2" and putting your grip point 1-1/2" closer to you, while allowing you to retain your stock throttle and brake cables. The PullBack Risers come with their own "split caps" for mounting, but the original Honda top clamp will fit.

The PullBack Risers are simple to install and best of all, do not require any drilling of the triple clamps! All stainless steel hardware is included. Fits VTX 1300R/S. 

To install them simply unbolt the stock risers from below the triple tree and unscrew the four allen head bolts from the stock topclamp. Install the Aeromach risers using the bolt kit provided.  Made from extruded Billet Aluminum, Chrome Plated.

These are the best risers that we can get.\

Installation Guide for PullBack Risers:

• Cover gas tank with a towel to avoid scratching.
• Loosen bottom bolts to stock risers first.
• Have a friend hold onto handle bars while loosening the top clamp bolts.
• Remove stock Risers.
• From the bottom, pass bolt (provided) through triple tree.
• Thread bolt into the bottom of the pullback riser but do not over-tighten yet.
• Position handlebars into risers and tighten down.
• Now do final tightening to the bolts below the risers.
• Adjust bar height to comfort.