Surface Mount Troffer 2X4 Light Fixture
Surface mount troffer 2x4 light fixtures are made to create a broad area of light in an office lighting situation. The lens cover diffuses the light with a prismatic pattern to produce maximum breakup of the light itself. For low ceiling areas, which is where these are often used, this is important to get the space evenly lit. It's been the common standard for lighting offices and commercial buildings where there is no overhead grid and the light fixture must be mounted directly on a surface. You can mount these on almost any surface, making it one of the most flexible light sources to cover a myriad of lighting applications. These are ready for T8 lamps with an electronic ballast which are standard in the fixture. The electronic ballast is a universal voltage of 120 / 277 volt which automatically senses the voltage you have and works properly. The ballast comes with a 5 year warranty, so you'll be covered against early failures which is unlikely. It can come ready for 2, 3 or 4 lamps within the fixture depending on the light output you want to achieve. If you need to save more energy, less lamps will often do the job for most general lighting, but if you need more light for a specific task, then choose the 4 lamp option. The light itself is post-painted so the edges aren't so sharp, that makes them electrical contractor friendly and easy to install. - Electronic ballasts designed for T8 lamps. - Does not include lamps. - 2, 3 or 4 lamp. - Prismatic acrylic lens.- 3.75 inch depth. - Dimension: W = 2 feet L = 4 feet. - 120 / 277 volt universal voltage.