Ushio GLC HP-600 JCS115V-600WCM 600W 115V Halogen Lamp

Ushio GLC HP-600 Halogen Bi-Pin LampThese medium wattage lamps allow for two instruments to be used on a 1200 watt capacity dimming channel while maximizing the light output. The Halogen capsule utilizes a bi-plane filament design, and incorporates a special gas mixture to prevent overheating and lamp darkening in smaller and hotter instrument designs. GLC HP-600 Features and Benefits:- Excellent color consistency from lamp to lamp- High color stability over the entire lifetime - 26 lumens per watt - Permits 2 fixtures per circuit - Bi-plane filament - GY9.5 Base GLC HP-600 Specifications:Wattage: 600 WattsVoltage: 115 VoltsBase Type: G9.5 Bi-PinLength: 101.6 mmLife Hours: 300 HoursColor Temperature: 3,2009(k) Other Known Codes: General Electric 93429, 6989P,Q575T6/5CL, HX-604 SOS Notes About GLC Bulb Removal and Replacement:When replacing a GLC lamp always wait for the lamp to cool down within the fixture before removing it.  Halogen lamps get extremely hot and can cause severe burning if touched while in operation or immediately afterward.  Take the lamp out by using a cloth that provides some insulation from the heat.  When removing an GLC from the fixture get as close as possible to the base before removing from the socket.  Take extra care when you take the new bulb out of the packaging and do not touch the glass.  Use gloves or a cloth to insert the lamp into the GLC socket.  The oil from your skin makes the glass superheat and causes early GLC lamp failure.