P125F

Pocketherm is aptly named as it fits in a pocket, or a bag, and the probe clips securely to the side of the thermometer, out of harm's way. Pocketherm switches on when the probe is swung away from the instrument case and switches off when it is folded back. No buttons or adjustments required. The probe can be cleaned with a Comark bactericidal wipe between each temperature check. * Tapered probe for faster response * Probe swings open to switch on instrument * Probe can be angled to suit usage * Readings clearly shown on the large LCD display * Thermistor accuracy meets all food hygiene regulations * LEDs for error free indication of temperature zones * °F display * Auto switch off for even longer battery life * Flashing LEDs plus buzzer for Instant Temperature Indication:- * Yellow = cold holding (below 40°F) * Green for hot holding (140°F to 180°F) * Red for cooked ground beef (160°F) Pocketherm with BioCote® Protection BioCote® is a silver based anti-microbial agent that is impregnated into the instrument case during moulding. BioCote® effectively inhibits the function, growth and reproduction of a wide range of micro-organisms and its protection is increasingly accepted as part of HACCP, due diligence and health and safety procedures. BioCote® protection lasts for the life of the instrument, because the agent is present throughout the case plastic and cannot rub off or be washed or leached out. BioCote® active ingredients are registered with the US Environmental Protection Agency (EPA). Although BioCote® inhibits the growth of micro-organisms on the instrument case, it does not protect individuals against such harmful organisms or remove the need to maintain the highest standards of personal and product hygiene and cleanliness. Sensor Type Measurement Range Scales Displayed Resolution Accuracy at +73°F (system) Operating Range Temperature Humidity LED Indication (Flashing) plus buzzer Yellow Green Red Auto Switch Off Weight Thermistor -40°F to +257°F °F 0.1° ±0.9°F, -4°F to +158°F, ±2°F full range -4°F to +122°F 10 to 90% non condensing +40°F and below from +140°F to +180°F +160°F and above After 60 minutes 9V IEC 6LF22 alkaline 600 hours minimum (continuous) Case L 170mm (probe retracted) x W 52mm x D 24mm Probe L 110mm 140gms with batte