Tableworks - Groomer's Tool Caddy

Developed with the groomer in mind, the Groomer's Tool Caddy features an innovative, patent pending design to safely and conveniently hold many of the tools that a groomer would use during their day. The Tool Caddy is manufactured out of light weight, yet sturdy, aluminum, which ensures years of use. It features individual openings for up to five scissors, additional openings for combs, brushes, etc., hooks for hanging electric clippers, nooses, leashes, etc., and a removable tray/shelf combination that holds smaller items and clipper blades. The Caddy is designed to securely hold the various grooming instruments and protect them from damage while keeping them readily accessible and preventing accidental injury to the groomer or animal. It mounts to the grooming arm post, is supported by the grooming arm clamp, and allows for unimpeded vertical (up and down) movement of the grooming arm post. The Tool Caddy is sized to fit standard 3/4" square grooming arm posts 

To assemble your Groomer’s Tool Caddy:

1) Remove the grooming arm post from the grooming arm clamp.

2) Insert the post into the 3/4" square hole in the upper plate of the

Caddy (the end with the Table Works logo and the 5 small oval

holes) and then through the 3/4" square hole in the base of the

Caddy. Position the Caddy either toward the table, away from the

table, or to the side of the table, depending on your preference.

3) Slide the 5" spacer tube onto the post.

4) Re-install the post into the grooming arm clamp.

5) Attach the upper tray (box with two holes in bottom) assembly to the lower shelf assembly with the

two screws (supplied). Make sure the screws are snug, but be careful to not over tighten.

6) Mount the tray/shelf assembly onto the Caddy by sliding the hooks that are on the arm/shelf

assembly into the large rectangular openings on the top of the Caddy.

7) Install the rubber o-rings into the small oval holes on the top of the Caddy.

The Caddy and spacer assembly will rest upon the grooming arm clamp and will not impede the

operation of the adjustment knob or the vertical (up and down) movement of the grooming arm post.