Diablo Sport Trinity Performance Programmer T1000
- Accepts up to 5 additional custom tunes.
- 2 channel analog input for connecting external sensors such as EGT and Wideband.
- Supports communication protocols from leading sensor manufactures such as Innovate, PLX, Zetronix and more.
- SD card slot for increased memory capacity.
- High speed USB connectivity.
- Checks and clears diagnostic trouble codes.
- Dedicated output for controlling the DiabloSport Extreme PowerPuck’s Power Levels on the fly.
- A large bank of end-user adjustable parameters
- View dozens of gauges at once!
- Virtual Drag Tree functions include 0-60 times, 1/4 mile times and more!
- 320x240 High Resolution Color Touch Screen!
- High Speed Data logging!
- Ships with suction cup mount (optional 2/16th Gauge Pod mount for sale).
Virtual Gauge Monitor The Trinity is one of the most advanced diagnostic tuning devices on the market today. With over 100MB of on board memory devoted solely to recording and playing back diagnostic PID/DMR data, it allows users to record hours and hours of continuous data streams directly from the vehicle’s PCM/ECM. The Trinity interprets PID and DMR data received from the OBD-II Diagnostic port on your vehicle and converts it into a readable format: A Virtual Gauge! Individual user customization is one of Trinity's most recgonizable features.
With Trinity's dynamic gauge layout there is literally an infinite number of combinations/customization of gauges to view!
(Limited based on memory)
Virtual Drag Tree
We just discussed the Trinity’s virtual gauge system and how your vehicle’s sensors can be displayed on the screen in real time- but did you know that there is information coming from your vehicle that can allow the Trinity to approximate all kinds of interesting read outs? One of the most intriguing is the Virtual Drag Tree! Using parameters such as vehicle speed, peak torque, wheel speed and others, the Trinity is able to give you an estimated quarter mile, 1/8 mile or time trial. Keep in mind that these numbers may or may not be accurate depending on variables, but they sure are fun to see!
The Trinity’s virtual tree allows users to choose to either monitor their reaction time (like the real world) or have the tree start when they press the gas from a stop. There are advantages to both! If you are using reaction time, you will gain experience for the track when launching off the line while the motion start will show you the time less human error. It’s your choice as to which you prefer!
Performance Programmer The Trinity’s tuning options vary depending on the vehicle that is being tuned. Gasoline powered vehicles feature tunes based on minimum octane ratings while Diesels are based on Horse Power Ratings. By way of example, If you have a 2008 Chrysler 300C your options in the tuning menu might be: 93 Octane Performance tune, 91 Octane Performance Tune, and a 2007 F-350 with a 6.0L PowerStroke might have the options of stock, 40 HP, 65 HP, and 100 HP. (Note:These options may not be the same in all models and can vary based on the current update of the tool).
Diesel Tuning Diesel trucks have massive horsepower and torque potential that can be unlocked just by programming the vehicle’s PCM or Powertrain Contol Module. Your application may have tunes for any of the following, plus more!
Towing: This setting is generally a of 40-60 HP and an average of 100 Ft/Lbs of torque (depending on application) and is for use when towing heavy loads near the applications factory towing capacity. This setting is designed to increase drivability while towing, net extra economy when cruising at highway speeds, and is helpful when driving through mountains while towing.
Economy:adds between 60-100 HP and 180-200 Ft/Lbs of Torque, economy gains average in the 2-3 MPG range(Highway)! This setting is not designed for heavy towing- limits are in the range of 6,000-8,000 pounds depending on your vehicle’s stock towing capacity. DiabloSport highly recommends the use of an aftermarket cold air intake and exhaust (4 inch diameter at the down pipe).
Extreme: This tune adds anywhere from 100- 185 horsepower and 220+ Ft/Lbs of torque and is specifically for peeling out down the strip! DiabloSport recommends only using the extreme tuning options if you have an exhaust and cold air intake due to a possible increase in EGT.
Diagnostic Code Reader
Trinity can also be used as a diagnostic code reader. Save yourself hundreds of dollars each year reading/clearing your own computer codes rather than paying a dealer to do the same. Its as easy as a few simple steps.
Step 1: From the main menu of the Trinity select “Diagnostics” Select “Show Trouble Codes” to show the last trouble codes your vehicles PCM displayed.
Step 2: Press the desired trouble code to see a full text description of that code.
Step 3: Once you have seen the trouble codes listed in your vehicles computer, you will want to clear them. In order to do this, press the back button on the right hand side of your Trinity’s screen and select “Clear Trouble Codes” from the trouble codes menu. The Trinity will then display that the faults have been cleared! Press continue…
Step 4: You have now cleared all trouble codes from your vehicles computer!
Control all of your analog devices from the Trinity
Trinity can also be used to support other DiabloSport products such as the DiabloSport Extreme PowerPuck and/or other third party analog devices such as wideband and EGT. The Trinity has the capability to support two additional analog products at any time. This means you can use the Trinity to adjust your Extreme PowerPuck settings on the fly while monitoring your vehicle's EGT.Supported Vehicle Application Notes:
The list of supported vehicles will continue to grow. Check back often to see if your vehicle has been added to the list. And as always, all DiabloSport updates are free