ATS Edge Products Attitude Angled Overhead Mount with Switches

Mount your attitude in the overhead compartment - Single piece of brushed aluminum - Switches can be used for any accessories - Angled for easy viewing EXTENSION CABLE BELOW MAY BE REQUIRED. Does not work with sunroof option.

 To install the Attitude Mount:

   First, remove the center console off the headliner by removing the screw out of the front, slide unit out and down. Disconnect the wires and take the unit out.  Remove the black lower piece out of the console.

   Next, take the screws out of the back of the Attitude Monitor. Separate the two halves.  Remove the sticker that is placed between the two halves and put it on the back of the display.  Sandwich the unit into the mount hole and put the screws back in place.  Now, push the mount into the console from the back (it will stay in place with friction).  Guide the wire from the mount through the headliner to the driver's side 'A' pillar and route it down through to under the dash.  Plug in the wires for the lights and reattach the center console back to the roof.