Bruce Dark n Rich
For general floor care of medium to dark brown wax finish floors. The pigment in Bruce Dark 'n' Rich will give your floor a beautiful, rich luster. For natural and lighter stained wax finish floors, consider Bruce Light and Natural. Directions: 1. Vacuum or sweep the hardwood floor. 2. Clean heavily soiled or worn areas with mineral spirits*, and let dry. 3. Shake Bruce Dark n Rich container vigorously. Spread a thin coat over a small area, or entire floor, with a wax applicator or clean lint-free cloth. 4. Let Bruce Dark n Rich dry approximately 30 minutes before buffing. Small areas may be hand buffed with a clean cotton cloth. The best results are obtained by using a heavyweight electric buffer with a fiber bristle brush. Routine buffing will renew the luster. No need to add wax each time. Important: If light spots caused by food, dried milk or sweet drinks appear after waxing, rub vigorously with a dampened cloth (not wet). Dry immediately. Re-wax with Bruce Dark n Rich and polish spots. Stubborn spots and heel marks may require a scrub pad and/or mineral spirits. * Mineral Spirits will remove wax build up and clean the floor. Please use as directed per label on can.