Replacement Spinalator Rollers

Replacement Spinalator Rollers
Visit Store
PRICE:
$219.99
at Chiropractic Equipment & Massage Tables
Silver Monster Seller

Product Details

Replacement Spinalator Roller-Spinalator Rollers New Roller BlackHigher Density Foam!They Include New Style steel one piece bearing & bolts for easy install.

Are back INSTOCK!!! Please be patient as we fill the BO List orders first...Thanks

Spinalator Rollers Set of three comes with Steel bearings, bolts, & lock washers. These replacement Spinalator rollers will fit all spinalators with electric elevation.

For Very Old spinalators (shown below) with the manual wheel elevation you will need to purchase a optional Update kit. If you are not sure contact our Service manager at  800 463 1381  ask for Keith  Replacement Spinalator Rollers Instructions 
  1. Remove top from spinalator by unclamping end brackets.
  2. Make sure hands are clear of any moving parts and turn table timer on. Elevate Roller to top height
  3. Turn Roller rotation switch OFF, with one roller centered to the top of the triangle assembly.
  4. UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
  5. Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing and dual bolt for ends. Make sure and use provided Lock Washer!!!
  6. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
  7. UNPLUG TABLE - Some spinalators have a auto retract to lower rollers. Failure to UNPLUG table will let the roller retract automatically. This could cause bodily injury or tear up your new spinalator rollers! This will also keep you from getting shocked if you happen to touch a exposed wire.
  8. Ensure Hands, tools, and anything else is clear of rollers then plug up table. Turn spinalator rotation switch on and cycle roller to next top height and shut off rotation switch again.
  9. Final Roller - Remove Bolt from Roller and remove old spinalator Roller. Install new Spinalator roller, New style roller will have a easy one piece bearing and dual bolt for ends. Make sure and use provided Lock Washer!!!
  Check Chain Tension on Spinalator Roller rotation motor chain while top is removed. The Spinalator Roller tension should be like a bicycle chain; tight but not over tightened, to stretch the chain! Lube Chain with a Teflon lube. WD 40 will stop a squeak but is water based and will evaporate quickly! If you have movement in the roller after tightening chain, check spinalator sprocket for a broken weld....

Spinalator Rollers,Spinalator Roller,Spinalator table roller, replacement roller for spinalator,Spinalator Rollers,Spinalator Roller,Spinalator table roller, replacement roller for spinalator

Review This Product

Be the first to review this product!

Submit Your Product Reviewall fields are required
  • * 100 character minimum
  • * 4 character minimum

Similar Products From Other Merchants

MonsterMarketplace.com