Andrew Cinta CNT-600 1/2" Transmission Line with N/Male Connectors

Andrew Cinta CNT-600 cable is an excellent choice for longer cable runs especially in building repeater systems due to its low loss characteristics.

These custom made cables will arrive with N/Male crimps on both cable ends.

Other cable lengths are available, the drop down box lists only the most common. If you would like a particular length cable made or need to have the cables expedited, please contact us at (877) 594-5766.

Because these cables are custom made to order, they are not returnable. Please double check your order for accuracy!

In the event that a particular cable length can't be made using Times Microwave LMR-600 we will contact you regarding alternative equivalent cable such as Andrew CNT-600 or Commscope WBC-600.

SpecificationsCable Type LMR-600 Impedance (Ohms) 50 Maximum Frequency 9.3 GHz VOP. 87% Peak Power (W) 40kW DC Breakdown Voltage NA DC Resistance (ctr/shld) Ohms 0.53/1.20 Capacitance 23.4 pF/ft Inductance 0.058 uH/ft Outer Conductor Tape & TC Braid Inner Conductor Copper Clad Aluminum (Solid) Diameter Over Jacket 0.590 in. Min. Bending Radius 1.50 in. Bending Moment (ft lbs) 2.75 Weight Per Foot 0.13 lb/ft Tensile Strength 350 Lbs. Flat Plate Crush Strength 60 lb/in Attenuation/100 @ 30 MHz 0.422 dB Attenuation/100 @ 50 MHz 0.547 dB Attenuation/100 @ 150 MHz 0.964 dB Attenuation/100 @ 450 MHz 1.72 dB Attenuation/100 @ 824 MHz 2.38 dB Attenuation/100 @ 894 MHz 2.49 dB Attenuation/100 @ 960 MHz 2.59 dB Attenuation/100 @ 1700 MHz 3.57 dB Attenuation/100 @ 1920 MHz 3.82 dB Attenuation @ 2000 MHz 3.90 dB

*In the event that a particular cable length can't be made using Times Microwave we may substitute the cable with an equivalent cable from Andrew, Antenex, Cellphone-Mate, Commscope, TerraWave or Wilson Electronics and others.