GK-SNUV - Andrew Universal Grounding Kit for 1/4 in through 5/8 in corrugated coaxial cable

GK-SUNV Universal Grounding Kit for 1/4 in through 5/8 in corrugated coaxial cable. This is a safety item that should be used on all external mount antennas. Protects against electrical shorts or a nearby lighting strike. The antenna ground provides a lower path to a safe discharge point. Also grounding the antenna will "drain off" electrical noise leaving a cleaner signal.

Small Universal Grounding Kit GK-SUNV Installation Instructions

Kit includes:

• Grounding kit
• Hardware
• Lug
• One roll of 2 in PVC tape
• One roll of 24 in butyl rubber tape

Dimensions:

• Nominal Size: 1/4 in | 3/8 in | 1/2 in | 5/8 in
• Bonding Conductor Length: 1524.0 mm | 60 in
• Cable Jacketing Removal Length, maximum: 59.1 mm | 2.3 in
• Cable Jacketing Removal Length, minimum: 55.9 mm | 2.2 in
• Compatible Diameter, maximum: 15.240 mm | 0.600 in
• Compatible Diameter, minimum: 2.540 mm | 0.100 in
• Lightning Protection Test Method: IEC 1024-1

General Specifications:

• Cable Type: Corrugated
• Grounding Kit Type: Universal Grounding Kits
• Color: Black
• Bonding Conductor Material Type: Copper
• Bonding Conductor Wire Size: 10 gauge
• Bonding Conductor Jacketing Material Type: PE
• Grounding Strap Material Type: Copper
• Lug Attachment: Factory attached
• Lug Type: Two-hole lug
• Rivet Material Type: Copper
• Weatherproofing Method: Butyl and electric tape