CSI-S2BSC - Dual band Splitter 2 Way Power Divider 800-2300 MHz

Our standard units are offered with N/Female connectors and are capable of handling 10W of power into a matched load. These units are ideal for in-building applications that require the combining or dividing of RF to accommodate multiple antenna locations.

This 2-way splitter allows you to drive two interior antennas from a single amplifier/repeater. Because you are splitting the signal each antenna will receive approximately 1/2 of the signal which equates to about 70% of the coverage distance when compared to driving a single antenna.

Connecting splitter to amplifier: Typically the splitter is connected to the amplifier using the 2' LMR-400 coax extension but any length of LMR-400 cable may be used.

Connecting antennas to the splitter:

• Most Wilson Electronics antennas may be connected directly to the splitter using either the N/Male to N/Male adapter or using a length of LMR-400 cable.
• The 301121WPS Dual-Band (Multi-Band) Ceiling Mount dome antenna, 301121 Wilson Cellular Dual-Band Ceiling Mount Dome antenna and 301135 - Wilson Cellular Dual-Band Directional Panel Antenna may only be connected to the splitter using a LMR-400 cable extension.

Specifications:

• Frequency: 800-2300MHz
• Signal Reduction: 3.5dB
• VSWR (In/Out): 1.35:1 / 1.20:1
• Connectors: N/Female
• Size: 3.78" x 2.2" x 1"