CPM-EZKit-Plus: Cellphone-Mate Dual Band, High Performance Signal Amplifier/Repeater COMPLETE KIT

• Boosts Cellular and PCS Signal by 10x
• Reduces Dropped Calls
• Improves Voice Quality
• Extends Cell Phone Talk and Standby Times
• Supports Dual-Band Frequencies (800MHz Cellular and 1900MHz PCS)
• Supports all major standards including CDMA, GSM, TDMA and AMPS
• FCC Approved (FCC ID: RSNCM2000) for Maximum Output Power (3 Watts on 800MHz Band, 2 Watts on 1900MHz Band)
• Not compatible with Nextel/iDEN
• Not compatible with 1700MHz AWS (T-Mobile US 3G)
• Complete Package for Small Office/Home Office use
• 2 year manufacturer warranty

• Cellphone-Mate Surecall CM2000-WL 50dB Signal Amplifier
• Interior Stubby Antenna
• MB825 Directional Exterior Antenna
• LMR-240 N/Male to FME/Female Cable
• SMA/Male to FME/Male Adapter
• AC Power Cord
• Velcro and Screw Mounting Kits

  Need a different configuration?

  • wpsantennas.com offers a wide variety of antennas and accessories, including lower loss LMR-400 cabling and lightning protectors, to help you customize your SOHO Wireless Dual-Band Amplifier for your specific application. Please browse our site or contact a Sales Representative for more information.

About the CPM-EZKit-Plus:

The CPM-EZKit-Plusprovides completely wireless boosting of signals for multiple users simultaneously. It supports all cellphone handsets and service providers in the PCS or Cellular frequency bands, and is perfect for use in office enterprises, large vehicles (ships, trains, buses), or homes with multiple users. A cellphone can be boosted as far as 200 feet away. A sophisticated Protection circuit also prevents damage to the amplifier due to interference or improper installation. With a SureCall™ Amplifier doing all the long-range work, the battery on your cellphone drains slower, thereby increasing talk time. The 6V design runs safer, cooler and more efficient. Finally, with proper use of theCPM-EZKit-Plus, dangerous hot spots are removed a safe distance from the user's body.

The MB825 Multi-band directional antenna provides better service with weaker signal but is directional therefore the system will only work for whichever carrier or carriers are on the tower you aim the antenna towards.

The directional multi-band is typically mounted on the edge of the roof nearest the cellular tower (typically using pole mount - not included). The antenna must be aimed at the cell tower. The 40' LMR-240 cable has a N/Male to FME/Female Connectors and FME/Male to SMA/Male Adapter to connect between the Directional antenna and SOHO amplifier. The Interior Antenna screws into the interior antenna connector on the SOHO amplifier.

Important Information Regarding Coverage:

• This amplifier/repeater, with appropriate antennas, is designed to cover a small office/home office sized area and is not designed to penetrate multiple interior walls or drive multiple interior antennas. In order to cover larger areas, penetrate multiple interior walls or drive multiple interior antennas you should consider our higher power systems: 800MHz Cellular Kit, 1900MHz PCS Kit, or Dual-Band Cellular/PCS Kit
• Coverage is dependent upon the strength of the signal received from the tower at the outside antenna. At the location that the outside antenna is mounted a signal strength of at least 3 bars is required. Use of the high-gain directional antenna for the outside antenna improves coverage area.

  How the unit functions:

  The 800MHz and 1900MHz cellular signal from the cell site is received by the includedMB825 Directional Exterior Antenna. The signal is then amplified and transmitted to your phone through the inside antenna. When the phone transmits, the signal is sent to the amplifier through the inside antenna and then amplified and sent to the cell site through the outside antenna.

  Compatible with:

  All US Cellular/PCS carriers except iDEN carriers such as Nextel, SouthernLinc, Mike (Canada). Not compatible with 1700MHz AWS (T-Mobile US 3G). Compatible carriers include: Verizon, AT&T GSM/GPRS/TDMA, Cingular, Alltel, Sprint PCS, T-Mobile (850MHz, 1900MHz), Cellular One, US Cellular, Midwest Wireless, Qwest, etc.

  Installation:

  In order for your system to function properly, you must maintain adequate separation between the interior and exterior antennas. This amplifier requires a minimum of 20' of separation between the outside and inside antennas. If a directional antenna is used for either the inside or outside antenna, ensure that it is not pointed at the other antenna.

    </>