Cellular Specialties Advanced (62dB) 800MHz Cellular In-Building Amplifier/Repeater System (3 indoor antenna)

0This item is not typically stocked and will be ordered especially for you. Please allow for extended delivery time. As a special order, it is not eligible for return. After placing your order, we will contact you to provide an estimated delivery date and to help confirm that this is the correct product for your application.

Our Advanced CSI Building Repeater system with 3 internal antenna is designed with a Cellular Specialties Bi-Directional Amplifier Model 51062 featuring 62dB of gain on the 800MHz band, is the perfect solution for medium to large applications such as a warehouse, factories, large offices and other open area buildings. The Model 51062 provides, as standard, the following integrated features:

• Alphanumeric user interface
  • Integrated digital power/AGC meter allows for precise setup without test equipment
  • User friendly technical language interface
• Oscillation detection and suppression control feature to prevent network interference
• Optional remote access of BDA via wireless or wireline modem
  • Web browser interface
  • Remote query of power output, AGC status, gain control and amplifier shutdown/restart

This system is a complete kit compatible with 800MHz Cellular Systems. Package will contain all items required to build one full amplifier/repeater system. All cables are crimped and all necessary adapters are included. The only additional items you will typically require are the pole to mount the Yagi antenna on and a ground wire if you chose the optional lightning suppressor. Need custom cables? We can custom build the cables to your required length using either LMR-400 or lower loss LMR-600. Contact us at (877) 594-5766 for more information.

800MHz systems work for Cellular systems using the 800MHz band, for example; Verizon, AT&T, US Cellular. The band that your carrier is using depends on your zip code. If you are unsure of the frequency band you are using, please contact us.

Zip Code/Carrier Name: We require you to provide us with your carrier's name and the zip code where the system is to be used so that we can attempt to check system compatibility.

Package Contents:

• Outdoor antenna: 301111 - Wilson Cellular Yagi (806MHz-940MHz) Cell Phone Antenna
• 50' LMR-400 Ultra Low Loss Cable (Yagi to Amplifier)
• Cellular Specialties 62dB (800MHz) Band Building Repeater/Cellular Amp
• 951113 - 2' Jumper Extension Cable - Times Microwave LMR-400 Ultra Low Loss Coax
• WPS-S-3BSC - Dual-Band 3-Way Splitter

(3)50' LMR-400 Ultra Low Loss Cable (Amplifier to Dome antenna)

Interior antenna: (3)301121WPS - Dual-Band (Multi-Band) Ceiling Mount dome antenna

Does not include pole/mast for mounting Yagi - see FMW4-YMST4: Antenex 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)

Cell phone amplifiers/repeater systems extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifiers reduce problems with signal fades and dropped calls while improving voice quality, service range and access. These multi-mode amplifiers are designed to offer a cost-effective solution for use in buildings. These amplifiers are network compatible and enhance the cellular phone user's satisfaction without compromising the operation of the cellular system.

This Amplifier-Repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.

The signal from the cellular tower is received by the outside antenna and then amplifier and repeated to your phone through the inside antenna. When the phone transmits it is received by the inside antenna and then amplified/repeated through the outside antenna to the cellular tower.

• Wireless operation - no physical connection to cellular phone
• In building and in vehicle models available
• Increases signal strength in buildings for 800MHz Cellular frequencies
• Allows multiple phones to be used simultaneously
• Increases your cellular phone's range
• Low cost solution for uncompromised performance
• Compatible with 800MHz

Coverage:

This advanced system is designed to cover up to a 40,000 square feet depending upon the strength of the outdoor signal. For larger buildings see our Cellular Specialties Premium 800MHz System (85dB).

Antenna Separation:

In order for your system to function properly, you must maintain adequate separation between the interior and exterior antennas. The following rules will help you maintain adequate separation:

• Ensure that the exterior Yagi antenna is aimed away from the interior dome antenna.

• Ensure that you have at least 75' of separation between the interior and exterior antennas.

Additional Documentation:

This documentation is for Wilson Cellular Amplifier/Repeaters but much of it will be applicable to this system.

• Amplifier/Repeater Information

• Estimating Build Cell Phone Repeater Coverage Area (PDF)

• Field Test Mode Instructions (PDF)

Please note that while lightning protection will help guard against amplifier damage due to a lightning strike it does not guarantee it.