952310 - 10' Extension Cable - Wilson 400 Ultra Low Loss Coax

Wilson 400 - 10' Ultra Low Loss coax extension. Coax is N-Male terminated. Depending upon what you intend to connect the cable to, an adapter may be required.

Cable comes finished with N/Male connectors installed, weatherproof heat shrunk and tested.

This cable will connect directly to an N/Female terminated device such as our Yagi/Dome antennas or our Wilson Cellular building amplifiers. Other items may require an adapter:

• 971107 (N/Female to FME/Female): Allows cable to be connected to FME antenna adapter or Wilson Cellular inline amplifier
• 971108 (N/Female to FME/Male): Allows cable to be connected to FME/Female antenna such as Wilson Cellular Trucker
• RFU-620 (N/Female to MiniUHF/Male): Allows cable to be connected to MiniUHF/Female device such as Digital Antenna amplifiers

Multiple lengths of LMR-400 extension cables may be joined using the N/Female to N/Female barrel connector.

As this cable is relatively stiff, if you intend to connect the cable directly to a phone adapter cable, you may wish to insert a more flexible 951101 - 5' Extension Cable in between the LMR-400 and the phone adapter cable. You will need adapter 971107 (N/Female to FME/Female) to connect the LMR-400 cable to the 951101 - 5' Extension Cable.

Specifications:

• Length: 10'
• dB Loss (800/850MHz band): 0.4dB
• Cable diameter: 7/16"
• N/Male Connector diameter: 3/4"

*In the event that a particular cable length can't be made using Times Microwave we may substitute the cable with an equivalent cable from Andrew, Antenex, Cellphone-Mate, Commscope, TerraWave or Wilson Electronics and others.