811710 - Wilson Cellular SIGNALBOOST Mobile and Home/Office 900/1800MHz Dual-Band Inline Amplifier (European/Asian Frequencies)

Supports European/Asian 900MHz (GSM) and 1800MHz (DCS) frequencies only - does NOT support North American frequencies.

The Wilson Cellular SIGNALBOOST (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies both European/Asian 900MHz and 1800MHz GSM and DCS signals providing up to 3 Watts of output power.

Features:

• Connects to ALL phones and data cards with a Universal Connector using a removable adhesive backed Velcro patch
• Significantly improves voice and data signal quality
• Receives and transmits better than your cell phone
• Extends cell phone battery times
• Maximum 3 Watts Output Power
• Power Control Logic ensures Maximum Output Power is within Cellular Standards
• Automatic Gain Control
• Can be Used in a Fixed or Mobile Application
• FCC and IC Type Accepted
• US and foreign Patents Pending

 Key Notes:

• Requires compatible European/Asian antenna (not included)

SignalBoost 811710 Documents:

• SignalBoost Brochure (PDF)
• SignalBoost Specifications (PDF)
• Installation Instructions

How the unit functions:

The 900MHz and 1800MHz cellular signal from the cell site is received by the compatible European/Asian antenna (sold separately). The signal is then amplified and transmitted to your phone through the included passive coupler adapter (attaches to the phone using velcro).  When the phone transmits, the signal is sent to the amplifier through the adapter and then amplified and sent to the cell site through the outside antenna.

May also be used in conjunction with the Wilson Cellular Cell Phone Cradle Plus. Compatible with:

Works with all European and Asian cellular providers operating on the 900MHz and/or 1800MHz band(s).

Does NOT support North American carriers or frequencies.

Includes:

• 811710 Wilson SignalBoost  (900MHz/1800MHz) Amplifier
• 6' Adapter Extension Cable & removable adhesive backed Velcro patch (359914)
• 12V DC Power Adapter (Car Charger)

Requires (not included):

• External European/Asian Antenna with FME Female connection (Wilson Cellular Antenna)

Optional Accessories (not included):

• Coax cable extensions (50 ohm)
• N/Female to FME/Female Adapter (to connect N/Male Ultra Low Loss cable to amplifier)
• Lightning Suppressor (In-Building application)
• Cell Phone Cradle Plus

Installation Instructions (PDF)

Specifications

Part Number811710UPC Number813986006221Frequency890-960MHz 1710-1880MHzGain (up/down)Cell Site ControlledMax Output Power3 Watts (+34dBm/+32dBm)Noise Figure (down)3.5dB NominalFlatness+/- 2dBIsolation>50dBPower Consumption12V, 2AConnectorsFME Male, 50 OhmsDimensions5 * 3.5 * 1.2 (inch)Weight1.03 lbs