811701 - Wilson Cellular 900MHz/1800MHz Dual-Band 3 Watt Direct Connection Amplifier (European/Asian Frequencies)

Supports European/Asian 900MHz (GSM) and 1800MHz (DCS) frequencies only - does NOT support North American frequencies.

Features:

• Maximum 3 Watts Output Power on 900MHz
• Maximum 2 Watts Output Power on 1800MHz
• Power Control Logic ensures Maximum Output Power is within Cellular Standards
• Automatic Gain Control
• Can be Used in a Fixed or Mobile Application
• FCC Type Accepted

 Key Notes:

• Must be connected directly to phone with phone adapter cable (not included.)
• Requires compatible European/Asian antenna (not included)
• May be connected to car kit with appropriate adapter

The Direct Connect (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies both European/Asian 900MHz and 1800MHz GSM and DCS signals providing up to 3 Watts of output power on the 900MHz band and 2 Watts of output power on the 1800MHz Band. Increases your phone's coverage up to 50 miles or more (under ideal conditions.)

How the unit functions:

The 900MHz and 1800MHz cellular signal from the cell site is received by thecompatible European/Asian antenna(sold separately). The signal is then amplified and transmitted to your phone through the phone adapter cable (sold separately). When the phone transmits, the signal is sent to the amplifier through the adapter and then amplified and sent to the cell site through the outside antenna. Compatible with:

Works with all European and Asian cellular providers operating on the 900MHz and/or 1800MHz band(s).

Does NOT support North American carriers or frequencies

Ideal for use with car kits requiring an external antenna. Adapter may be required to connect to your particular car kit.

Includes:

• 811701 Bi-Directional European/Asian Dual-Band (900MHz/1800MHz) Amplifier
• 6' Adapter Extension Cable
• 12V DC Power Adapter (Car Charger)

Requires (not included):

• Compatible European/Asian antennawith FME Female connection (Wilson Cellular Antenna)
• Phone Specific Antenna Adapter with FME Male connection to connect directly to your phone. With appropriate adapter may be connected to most full install car kits which support an external antenna.

Optional Accessories (not included):

• Coax cable extensions (50 ohm)
• N/Female to FME/Female Adapter (to connect LMR-400 Ultra Low Loss cable to amplifier)
• Lightning Suppressor (In-Building application)
• Hardwire wiring kit
• AC Adapter

Catalog Page (PDF)

Specifications

Part Number811701UPC Number813986005804Frequency900MHz GSM 1800MHz DCSGain (up/down)Max 10 dB / 14 dBMax Output Power3 WattsMax RF (up/down)+15dBmNoise Figure (down)3.5dB NominalFlatness± 2 dB / ±2 dBIsolation90dBPower Consumption12 V, 0.5-1.5 A maxConnectorsFME Male, 50 OhmsDimensions5.5 * 4.3 * 1.4 (inch)Weight1.32 lbs