811201 - Wilson Cellular 800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier

Features:

• Maximum 3 Watts Output Power on 800MHz
• Maximum 2 Watts Output Power on 1900MHz
• Compatible with all Cellular/PCS Carriers and technology (GSM/GPRS, CDMA, TDMA, AMPS/Analog) except iDEN (Nextel, Southern LINC, Mike) and 1700MHz AWS (T-Mobile US 3G)
• Passes TIA/EIA-98-E transmit tests for evaluating CDMA Cellular Phones
• Power Control Logic ensures Maximum Output Power is within Cellular Standards
• Automatic Gain Control
• Can be Used in a Fixed or Mobile Application
• FCC and IC Type Accepted

 Key Notes:

• Must be connected directly to phone with Wilson Cellular phone adapter cable (not included.)
• Requires Wilson Cellular antenna (not included)
• May be connected to car kit with appropriate adapter

The Direct Connect (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies both 800MHz and 1900MHz cellular and PCS signals providing up to 3 Watts of output power on the 800MHz band and 2 Watts of output power on the 1900MHz (PCS) Band. Increases your phone's coverage up to 50 miles or more (under ideal conditions.)

Works with all Cellular/PCS Service Providers except iDEN (Nextel/Southern LINC/Mike) and 1700MHz AWS (T-Mobile US 3G)

How the unit functions:

The 800MHz and 1900MHz cellular signal from the cell site is received by the Wilson Cellular antenna (sold separately). The signal is then amplified and transmitted to your phone through the Wilson Cellular phone adapter cable (sold separately). When the phone transmits, the signal is sent to the amplifier through the adapter and then amplified and sent to the cell site through the outside antenna. Compatible with:

All US Cellular/PCS carriers except iDEN carriers such as Nextel, SouthernLinc, Mike (Canada). iDEN users should use the 5 Watt Direct Connection Amplifier for Nextel/iDEN. Not Compatible with 1700MHz AWS (T-Mobile US 3G).

Compatible carriers include: Verizon, AT&T GSM/GPRS/TDMA, Cingular, Alltel, Sprint PCS, T-Mobile (850MHz, 1900MHz), Cellular One, US Cellular, Metro PCS, Virgin Mobile, Cricket, Qwest, Boost Mobile, etc.

Ideal for use with car kits requiring an external antenna. Adapter may be required to connect to your particular car kit.

Includes:

• 811201 Bi-Directional Dual-Band (800MHz/1900MHz) Amplifier
• 6' Adapter Extension Cable
• 12V DC Power Adapter (Car Charger)

Requires (not included):

• External Antenna with FME Female connection (Wilson Cellular Antenna)
• Phone Specific Antenna Adapter with FME Male connection to connect directly to your phone. With appropriate adapter may be connected to most full install car kits which support an external antenna.

Optional Accessories (not included):

• Coax cable extensions (50 ohm)
• N/Female to FME/Female Adapter (to connect LMR-400 Ultra Low Loss cable to amplifier)
• Lightning Suppressor (In-Building application)
• Hardwire wiring kit
• AC Adapter

Catalog Page (PDF)

Specifications

Part Number811201UPC Number813986003817Frequency824-894MHz 1850-1990MHzGain (up/down)Cell Site Controlled Max 10 dB / 14 dBLinear Output Power+30dBmMax Output Power3 WattsMax RF (up/down)+35dBm/+15dBm,Noise Figure (down)3.5dB NominalFlatness+/- 2dBIsolation90dBPower Consumption12V, 1.5AConnectorsFME Male, 50 OhmsDimensions5 x 3.5 x 1.2 (inch)Weight1.03 lbs