1900MHz PCS In-Building Amplifier (50dB) Model 150

This item has been discontinued. The Wilson Electronics 801365 has been selected by the staff at wpsantennas.com as a replacement PCS building repeater unit.

The Cellular Specialties Model 150 In-Building Amplifier, featuring 50dB of gain on the 1900MHz PCS band, is the perfect solution for small office/home office installations. The easy to install BDA was designed for placement on a desk or countertop but can be wall mounted if preferred. The Model 150 provides, as standard, the following integrated features:

• The Model 150 continuously monitors its operation and responds by reducing the gain of the amplifier to eliminate an unstable condition.
• Automatic Gain Control (AGC) lowers the amplifier gain in order to reduce strong signals.
• The overload shutdown with automatic recovery features detects very strong signals that cannot be adequately controlled by the AGC. The amplifier will disable itself and then attempt to recover. The amplifier is active for a very brief period of time (less than 30 milliseconds) until the overload condition is eliminated.
• Higher power output than any other amplifiers in its class with approximately 100 milliwatts (+20dBm) in the uplink and downlink for all models.

This product is the amplifier only - does not include cabling and antennas which are required to make a complete system.

Amplifiers operates on the 1900MHz PCS frequency band (for example: Sprint, T-Mobile). If you are unsure of the band your carrier is using, please contact us.

Zip Code/Carrier Name: We require you to provide us with your carrier's name and the zip code where the system is to be used so that we can attempt to check system compatibility.

This product, while fully warranted by the manufacturer, is non-returnable. If you have any questions about the product or compatibility, please contact us prior to purchase.

Specifications

Gain50dBFrequency BandPCS-Full (1850MHz-1990MHz)Linear Output Power+19dBm (typical)Propagation Delay<150nsNoise Figure4dBDimensions/Weight6.24" x 3.05" x 1.13" / 2lbsConnectorN-FemalePower Requirements5Vdc, 1.2AIndicator LEDsPower, AGC, Isolation, Shutdown

This product, while fully warranted by the manufacturer, is non-returnable. If you have any questions about the product or compatibility, please contact us prior to purchase.