HIGH MARK WAX (p/n: FGA064HM)

24 rolls of Black HIGH MARK (WAX) ribbon with a 1" core, coated side in. Dimensions: 2.52in wide X 1181ft long (64mm X 360m)HIGH MARK is a General Purpose Wax ribbon that prints exceptionally well on coated stocks.  It offers higher durability than most wax ribbons on coated stocks and features a specially formulated backcoat which helps protect the printhead.  HIGH MARK ribbon has a lower melting point and can print at lower heat settings which dramatically extends printhead life.  HIGH MARK ribbon is recommended for coated paper tag and label stocks, Polyethylene films (i.e. Polyart) and Polypropylene films (i.e. Kimdura). TechnicalSpecs:

• Color Code Tab - Purple
• Maximum Print Speed - 12 ips
• Film Thickness - 4.5 microns
• Total Ribbon Thickness - 7.5 microns
• Transmission Density - 1.45 (MacBeth Scale)
• Ink Melting Point - 62C/144F

Resources HIGH MARK Spec Sheet(PDF, 65 KB) CleanStart Flyer (PDF, 3.1 MB) Use and Storage Instructions: For optimal print results, thermal transfer printing should occur in the temperature range of 41F to 95F at 45% to 85% relative humidity.  Suggested storage conditions for up to one year duration are 23F to 104F at 20% to 85% relative humidity.  Exposing thermal transfer ribbons to direct sunlight or moisture will cause damage to the ribbons.