JLT Performance PCV Pre-Filter - Black

Cars and trucks like the 03, 04 Cobras and the Lightnings are prone to major amounts of oil being re-circulated back into the intake track through the PCV system. This can cause sticky throttle, clogged intercooler fins, gummed up intake runners, carbon deposits and can even lower the octane rating of your fuel. With this new Pre-Filter from JLT you will greatly reduce the amount of oil that gets into your intake track. Its a full C&C milled billet aluminum body loaded with a full metal, reusable filter that will trap the oil vapors and allow the PCV air to flow through as it normally would. This filter is easily cleaned with degreaser or brake cleaner. Also included is the rubber seal into which the PCV valve will fit. This will work on all 96-04 Cobras, Lightning, MACH I, Bullitt, Marauder and most all cars equipped with a standard 3/4" base PCV valve (some hose re routing may be needed on some models). Great for any supercharged vehicle. The JLT Pre-Filter is designed to fit on the PCV side of these vehicles, but will also fit the opposite side as well if needed. Most of the oil coming through the PCV system is coming from the PCV side, but can come in the opposite side as well. Check your intake tube for oil to see if 1 or 2 are needed for your application. Available in black or silver (See below for silver) JLT Pre-Filter fitment guide: 96-98 Cobra - driver's side 99-04 Cobra - both sides Lightning - passenger side/drivers side with hose rerouting 2001 Bullitt - passenger side Marauder - driver side 03-04 Mach 1 - both sides