|
|
|
CLICK ABOVE TO INLARGE AND SEE CASE STUDY.
TEST 1:I TOOK A SHELL THAT WAS STAINED BAD THAT WAS LEFT OUTSIDE ALL WINTER IN THE SNOW. TUMBLED WITH CORN COB BLEND AND C/PX ALL NIGHT, WELL DID IT REMOVE STAIN ? NO! BUT IT WAS THE SHINIEST STAIN I EVER HAVE SEEN !(PROOF THAT C/PX DON'T HURT CASE AS IT DID NOT EVEN MAKE IT THROGH STAIN TO GET TO BRASS) SEE TEST 1 ABOVE INLARGE.
TEST 2: WELL WE COULD USE ANY ABRASIVE OR CHEMICAL AND THIN AND WEAKEN THE CASE NO THANKS! SO I CHANGED MEDIA TO BRASS WORLDS WALNUT BLEND & CORE-CUT ADDED STAINED CASE, NOW THIS DID TAKE 4 MORE HOURS WHICH MAKES SENCE AS AGAIN WE DON'T WANT TO HURT CASE ONLY REMOVE STAIN. IT WORKED, SHELL CAME OUT NO STAIN WITH A SATIN FINISH SEE TEST 2 ABOVE.
TEST 3:WE COULD STOP HERE, BUT I LIKE A HIGH SHINE ON MY BRASS. I THOUGHT I RAN TUMBLER TO MUCH ON THIS SHELL ALREADY,SO I CHANGED MEDIA TO BRASS WORLDS TREATED CORN & WALNUT MEDIA BLEND WITH ULTRA 60, IN 60 MINUTES I HAD A LIKE NEW SHELL WITH A MATCH GRADE FINISH,SEE TEST 3 ABOVE.
Now This Was A Extreme Case Would Most likely Scrap This Shell, But Many Of you Have Very Hard To Get Brass Some Irreplaceable. Now You Have A Way To Recover That Old Stained Case.
CHOOSE 5 OZ OR 10 OZ CONTAINER OF Champions Brand CORE-CUT MEDIA MODIFIER! SCOOP & DIRECTIONS.(Core Cut Go's A Long Way)
Media Modifier Core-Cut® is a compound used to clean really dirty brass but more especially brass that has been stained from the use of Black Powder that has not be removed from cases within a reasonable amount of time. Core-Cut® will take that tired looking antique patina off your cases (With Out Harming The Case)to prep your brass for a cleaner brighter looking match grade factory finish Using C/PX Or Ultra 60. You will noticed a cleaner primer pocket after using Core-Cut® .
Use Media Modifier Core-Cut® in conjunction with walnut media. The cleaning process will take longer than conventional brass tumbling depending on the condition of your cases, the tumbler being used, etc.
After using Media Modifier Core-Cut® your cases will have a satin finish then replace your media with some fresh Corn or Walnut Tumbling Media adding Media Modifier C/PX Tumbling Media Additive sparingly to bring your cases to a match grade finish
And Remember a little goes a long way so start with a 1/4 of a scoop for 3-5 pounds of vibratory tumbling media and view the results.
Media Modifier Core-Cut® is a trademark of jodeco industries,inc.mount holly,nc
|
|
|
|
|
|
|
|
