|
|
|
Xantrex Freedom Marine Inverter/ChargersWith filtered modified sine wave output, Freedom Marine inverter/chargers run virtually anything on your boat, from office equipment to household appliances and electronics. Freedom Marine 10 Specifications Electrical Specifications - Inverter Output power (continuous) 1000 W Surge power (AC amps) 25 A Output frequency regulation 50 or 60 Hz, quartz regulated Inverter voltage regulation 120 V +/-5% true RMS Output wave form Modified sine wave Efficiency (full load) 85% Peak efficiency 93% No load current draw (idle mode) 0.12 A AC transfer switch 30 A Electrical Specifications - Charger Charge rate 50 A DC AC input voltage range 90 − 130 VAC Battery voltage (nominal) 12 VDC Battery voltage range 10.0 − 15.5 VDC Low battery cut-out 10.0 VDC AC input (max. charge mode) 12 A AC Bulk charge voltage 14.4 VDC Float charge voltage 13.5 VDC Equalize charge voltage 16.3 VDC Battery charge outputs 2 Charge control 3-stage Battery type settings Wet/Gel 1/Gel 2/AGM Equalization Yes Temperature sensitive charging Yes General Specifications Optimal operating temp. range 32°F − 104°F (0°C − 40°C) *derated below 0°C and above 40°C Optional remotes Freedom Basic Remote or Link instrumentation Dimensions (H x W x L) 7.9 x 11.5 x 13.2” (201 x 292 x 335 mm) Weight 34 lb (15 kg) Warranty 30 months Part numbers 81-1011-12 84-2056-01 (Freedom Basic Remote) 84-2019-02 (Link 1000) 84-2000-06 (Link 2000) Note: Specifications subject to change without notice.
|
|
|
|
|
|
|
|
