|
|
|
LOOK HEAD FIT Headset System
This LOOK patented headset design allows for headset and stem adjustment independent of each other.
Headset adjustment is executed via a threaded insert that is installed on the HSC 6 fork’s special steerer
tube. The result is having your headset correctly adjusted even when you need to adjust or swap your
stem. This new LOOK technology saves 40 grams through the elimination of the compression plug.
CUSTOM FORMED TUBE SETS
Each section of the custom formed tubeset has a very specific shape both internally and externally.
This optimizes the lateral rigidity while maintaining vertical compliance, resulting in a more efficient yet
comfortable ride. The LOOK lugs are also designed with very detailed parameters. The lugs allow for
increased ride feel tunability that many other construction methods do not do as well.
‘E-POST’ Seatpost with Interchangeable Elastomers
1) Anti-rotation: as the E-post is not round, it is always aligned with frame’s centre line.
2) Vibration Dampening: uses replaceable elastomer blocks to help enhance ride comfort.
3) Carbon friendly tightening torque: 5 Newton/meters is enough
4) Three different density (black, red, or grey) elastomer blocks are included with each frame to fine
tune the vibration dampening characteristics.
COMPRESSED CARBON FRAME DROPOUTS
The rear dropouts are directly compressed at the time when both the seat and chain stays are moulded,
resulting in a single-piece rear triangle. The frame is lighter while blending optimal stiffness.
VHPC BOTTOM BRACKET (VERY HIGH PRESSURE COMPRESSED CARBON)
The bottom bracket is the heart of the frame. In order to maximize pedaling efficency, LOOK
has developed a proprietary technique called ‘Compressed Carbon Technology’. The precise positioning
of carbon fibres inside the mould combined with very high-pressure compression during
the moulding process produces a very light and a very stiff bottom bracket shell. The weight
of the bottom bracket is only 130g with a 170N/mm stiffness rating once the frame has been
assembled. You feel the bike accelerate as you transmit power with each pedal stroke.
LOOK HSC6 FORK
The 100% carbon single-piece ‘monobloc’ fork weighs only 350g (uncut) and meets the NEW
Standard EN 14781 Requirement (144 joule frontal impact). Using the same technology as the
rear dropouts, the carbon dropouts are compressed at the same time the fork blades, crown and
steerer are moulded. The integrated carbon conical bearing seat (45° race angle) allows for the
direct fitment of the bearing, eliminating the need of an additional aluminum crown race.
The HSC 6 is designed to be used with an 1-1/8’’ upper and 1-1/4’’ lower sealed bearing.
VHM (VERY HIGH MODULUS)
LOOK HSC 6 - meets the new Standard EN14781 SAFETY
Requirement
FORGED CARBONE HM with NANOTECHNOLOGY
BSA - Width: 68mm
Braze-On
Integrated ‘E-POST’
HEADFIT Integrated
1-1/8’’ uper and 1-1/4’’ lower
sealed bearings – uper ø 41.7mm –
lower ø 46.8mm – angle 45°/45°
Compresed carbon, replaceable aluminum
deraileur hanger
2
XS - S - M - L - XL
CREDIT AGRICOLE PRO TEAM REPLICA
1040g for size S, with uncut seat tube
350g
Suplied with 3 sets of elastomer blocks
Grey: Soft
Red: Medium
Black: Firm
Frameset
Structural: 5 years
Paint and Finish: 1 year
(Non-Transferable)
|
|
|
|
2009 Look 595 Origin Pro Team Reviews
|
|
|
