|
|
|
New Page 7
This thermostat
took years to develop and has become a popular model. All the features
you want without too many buttons. Simple is always better. We have
added backlighting to the full-size display and an on/off switch to
control the illumination. On the front two simple buttons control the
temperature up and down, while all the programming keys are hidden under
the front cover, protected from wandering, unauthorized fingers. Comfort
and convenience is always our primary goal at King.
Specifications
Technical
Features
Temperature Range:
44°F to 95°F (7°C to 35°C)
Temperature Default:
Your saved setting
Display Format: LCD
Illumination: Green LED
Sample Rate: Every 60 seconds
Room Temp. Display:
Large LCD
Delay: 3 minutes on or off
Accuracy: NEMA TEST
1.5°F @ 22 Amps,
1.4°F @ 16 Amps,
1.2°F @ 10 Amps,
9°F @ 4.2 Amps
Power Source:
120 VAC (ESP120),
208/240 VAC (ESP230),
50 - 60Hz
· 22 Amps at 240V, 5280 Watts.
∙ 22 Amps at 208V, 4576 Watts.
· 22 Amps at 120V, 2640 Watts.
· Three wire installation.
· Snap action relay built-in.
· 30 Amp relay (before derating).
· Wire leads #12 AWG.
· ¾" depth into wire box.
· 44°F to 95°F (7°C to 35°C) set point range.
· Single button operation.
· Electronically anticipated.
· Thermistor sensor.
· 120V or 208/240V models only.
· Contemporary styling.
· Digital thermometer/set point.
· Large LCD display.
· Meets energy requirements.
· 1.5 degrees maximum.
· 3 min. delay between cycles.
· For use on all types of electric heaters, fan-forced,
baseboard, radiant, etc.
· On/Off switch for backlight.
· On/Off switch for system.
· Battery backup.
· Save up to 15% on your heating costs.
· Even temperature control.
· Electronic temperature sensing is the most
accurate technology.
· 3 minute cycle rate reduces temperature swings and
increases comfort at all control settings.
· Contemporary design.
· Complies with all codes requiring anticipated or
electronic thermostats.
· Single pole design with third wire to power display.
· LCD display with temperature.
· White color with gray print.
· Shallow design allows more wiring room inside full
electrical boxes.
· Tap key temperature settings.
· Red LED Heater ON Indicator.
· Backlight Display.
· System On/Off Switch.
Installation
This line voltage device should be installed and
serviced by a qualified electrician. The thermostat has been designed to
mount to a standard 2" X 4" electrical outlet box. Leveling of the
thermostat is not required. Mounting screws are provided. Mount the
thermostat about five feet above the floor in an area with good air
circulation. Avoid mounting the thermostat where it will be affected by
drafts, air from ducts, and radiant heat sources such as appliances, the
sun or plumbing pipes.
|
|
|
|
|
|
|
|
