|
|
|
HWTL-01 Desktop Dip Coater is designed for preparing various epitaxial films from liquid solution by dip coating under a controlled temperature chamber. It features with
Pulling rate varies from 0.01 mm/sec. to 2.3 mm/ sec. (1- 140 mm/min.) --- Faster speed: 140 - 180 mm/minute is available upon request at extra cost
Digital display speed with +/-0.05% accuracy
Travel Distance Controller: One cycle travel distance is 80 mm or 3.14". Please adjust the wire length to arrange the travel distance beforehand.
Pulling wire is built in a controlled temperature chamber
Dry oven with digital temperature controller is included.
Inside chamber size of oven: 280 mm L x 280 mm W x 280 mm H made by stainless steel
Power requirement: 600W. Please choose operation voltage ( 110V or 220V ) from product option. ( 800W Dual Change Transformer will beprovided for 110V operation).
Liquid solution is placed in the controlled temperature oven with +/- 1o C tolerance from room temperature to 200oC. Please keep warm at least half hour after the temperature reach the set point on the digital temperature meter to ensure an equilibrium temperature distribution in the liquid solution.
Max. sample size to dip coat: 2" W x 3" L (Container: ¦µ60mm and 80H mm, solution container shall be larger than sample size)
Compact desktop design with dimensions: 500 mm x 500 mm x 1180 mm
Net Weight: 55 Lbs
Dimension of shipment: Two packages: 20" x 20" x 26" for Oven and 22" x 12" x 13" for dip coater
Weight of shipment: Total 91 Lbs 56lbs for oven and 35lbs for dip coater
Operational Manual Download Catalog About Shipping / Handling
|
|
|
|
|
|
|
|
