|
|
|
Features
This is an Universal AC to DC adaptor kit, included one switch DC-DC adaptor with output 1.5V, 3V, 4.5V 5V, 6V, 9V, 12V and one AC 100- 240VAC-12DC adaptor.
Max. Output current: 1000 mA
It is designed for running most of portable devices from 1.5V - 12V both in home and in car.
12 W Max. output.
6 pcs detachable round DC plugs are included to fit almost every DC equipment
6 coaxis plugs show as below
100 - 240V AC to 12V DC with Car cigarette lighter plug Adaptor:
Run all 12VDC mobile devices in home and office, 100 - 230V AC worldwide power support
Input 100- 240V AC 50/60 Hz 0.45A max. Worldwide power support
Output 12V at 1.5A
UL listed
About DC Regulating Adaptor ( 1.5V - 12V )
Input ( VDC)
11V - 14V
Output (VDC)
1.5, 3, 4.5, 5, 6, 9, and 12V selectable by switch
Current
1000 mA
LED Monitor
Green LED indicate power on
Protection
Short circuit and replaceable fuse for overload
Connectors
Male car plug for input, and Universal two hole for output, with 6 feet long cable
DC Plugs
5 coaxis plugs: 1.4 x 3.5, 2.1x5.0 2.5x5.5 1.7x4.0, 0.75x 2.4 ( mm, diameter)
1 square connector: 3.5 x 3.5 mm
Applications
For operate most of personal stereos, CD/MD player, Discman, Electronic games, Multimedia and IT devices in the car
Smart Tip
Combining a AC-DC 12V adaptor, you run a handhold devices worldwide both in car and home
Combing with a 11.1V Li-Ion battery pack, you can get external battery for running
It can be used as a DC regulator to run 13W HID light with 11.1V Li-Ion battery pack
Size
4.2" x 1.8" x 1.2"
Weight
3.7OZ
OPERATING INSTRUCTIONS:
Voltage Selection1. Determine proper output voltage setting. Check rating plate and the voltage indication marked next to input jack on your device. You may find the voltage in your AC adaptor or in the user's manual.2. Set the voltage selector switch at your desired voltage.
TIP Polarity Selection1. Determine proper connector size. determine required tip polarity. reversed polarity can result in permanence damage to your device. Common symbols for tip polarity are shown below:
2. Insert connector output plug into your appliance.3. Insert car adaptor into vehicle cigarette lighter outlet. Green LED will light to indicate proper operation. If LED fails to light. See FUSE REPLACEMENT.4. Turn on your appliance. If it does not operate, immediately disconnect and review the above steps.
FUSE REPLACEMENT
To check or replace fuse, simply rotate the plastic tip at the end of adaptor counterclockwise. Visually inspect fuse element. If blown of if you are unsure, replaced fuse(1.5AMP).
|
|
|
|
|
|
|
|
