|
|
|
FOAMCOAT is a non-toxic, water based coating for styrofoam and polystyrene foam, as well as other surfaces. It provides a hard, durable finish that resists chipping and cracking, yet can be sanded smooth or carved to add detailing. FOAMCOAT can be used on a wide variety of surfaces including foam, primed wood, concrete block, primed fiberglass, paper mach, muslin and many other materials. FOAMCOAT is fully compatible with all Roscopaints used either as tints or as surface coatings. FOAMCOAT is inherently flame retardant and water resistant. APPLICATION: Apply by brush, roller, or hopper spray gun depending on the desired finish. The thickness of the coating is determined by the application. When coating over fine details, use successive thin coats to build up a protective layer without obscuring the details. For an extra smooth finish without sanding, smooth the coated surface with a wet sponge just before the FOAMCOAT has set completely. SUGGESTED USE: Excellent for use as a protective coating for all types of foam projects. Especially useful on foam scenery or props that receive physical abuse or need to last for extended tours. It can also be used as a texturing agent that is much more durable than plaster or joint compound. SURFACE PREPARATION:Foam: All surfaces should be clean and dry before application. Wood & Plastic: Prime surface with Rosco Tough Prime before applying FOAMCOAT. For particularly difficult materials, lightly sand surface to give it more "tooth" before applying FOAMCOAT. COMPATIBILITY: Foamcoat is compatible with all water based coatings and is easily painted or tinted. Tint Foamcoat using Supersaturated Roscopaint or Universal Tints. It is not necessary to prime Foamcoat before painting.MIXING: Stir well. Due to the weight of the solids in Foamcoat settling may occur. Use a power mixing blade for best results. DILUTION: Use Foamcoat undiluted for most durable single coat application. Foamcoat may be diluted with water if desired. Thinner mixtures will flow and level more than an undiluted application and will dry to a thinner coating.COLOR: Off-white, matte finish. COVERAGE: Varies with application. Approximately 150 sq. ft per gallon. FILM THICKNESS: Varies with application. 1/16" - 3/16" per application. DRY TIME: Varies with thickness of coating. Approximately 2-8 hours. Allow 24 hours for full cure. CLEAN-UP: Soap and water. SHELF LIFE: Minimum 24 months.
|
|
|
|
|
|
|
 |
Discount Video Equipment
Online Sales of Pro Film, Video &
Theatrical Equipment & Supplies
www.dtcgrip.com
|
Lighting Kits
Premium video lighting kits & more.
Complete with everything you need!
eoslightingllc.com
|
Order Rosco Gobos Online
Steel, glass, color, prismatics,
iPro Slides -search and browse
www.theatricalprojections.com
|
Rosco Paint
Award Winning Sales & Service,
Maximum Discount Prices!
www.northernsound.net
|
Coat Foam
Find the Right Tool for the Job.
Save on Coat Foam!
BizRate.com/PowerTools
|
Foam Coat
Find and Compare Prices
on Foam coat
www.smarter.com/Building_Supplies
|
Foam Coat - Cheap Prices
Home and Garden Decor, Furniture,
& More. Foam Coat on Sale!
www.NexTag.com/Home&Garden
|
Oil&Gas Industry Coating
Internal coating for pipes, valves
Stop corrosion, erosion, wear
www.Sub-One.com
|
Victrex plc
High performance materials,
polymers, coatings , & film
www.foodonline.com
|
Raymor Coatings
Raymor coatings for aerospace
Raymor coatings for ball- valves
www.raymor.com
|
Waterproof Deck Coatings
For Homeowners - Apt. Owners
General Contractors - Prop. Manager
www.iacrotech.com
|
Thermal Spray
High performance coatings including
hvof, plasma, aluminum diffusion
www.precisioncoat.com
|
Rosco Paint
Award Winning Sales & Service,
Maximum Discount Prices!
www.northernsound.net
|
So Cal Waterproofing
Specialists in deck coatings pool
decks, walkways, basement leaks
Waterproofed.com
|
|
| |
|
